HP Deskjet F2480
-The F2480 before install with CISS.
-A typical piping arrangement on HP cartridges.
For more info about cartridge modification, please refer to http://forum.save2print.com.my/forum/thread.aspx?ID=22
-Open the front cover and cross the cartridges through the lower part.
-Be careful not to damage the cartridges' print head.
-Install the cartridges into the carriage unit.
-Apply some glue on the clip and paste it to the left side of the carriage unit with the clip's opening facing outwards, as shown in the picture.
-We recommend the use of super glue for better bonding strength and long-lasting use.
-Paste the clips on the position as shown in the picture.
-Move the carriage unit all the way to the left then to right.(1)
-Check whether there is sufficient length for the piping.
-Make sure the piping is not too loose or too tight when the carriage unit moving to and fro.
-Adjust the length if necessary.(2)
-After the ideal length of the piping achieved, secure the piping to the clip.(3)
-Slip the piping into the gap between the front cover and the printer's housing.
-Close the front cover.Make sure the piping is not pinched.
-Overall view of the printer with CISS installed.
-F2480 with CISS. Completed.
+ comments + 1 comments
Thanks for sharing such nice information!! You can find more products at affordable price in Splashjet.co.in. Splashjet is one of the best Printing technology. Splashjet offers wide range of products for desktop and LFP inkjet printers. For more information visit hp
ciss.
Post a Comment